Flashing is the best way one could reach for system optimization. So here we will guide you through complete SP Flash Tool processing from which MTK Android flash can be fulfilled so easily. The tool runs through Windows PC and Linux and going to support in flashing various files to the system. So learn how flash stock rom using smart phone flash tool ( SP Flash Tool )
INSTRUCTIONS AND REQUIREMENTS
These are the instructions to flash stock rom or any custom rom to your phones using SP Flash tool on Windows Computer.
Your Android smartphone should have at least 40-50 percent of battery to completely perform the flashing process
step 1. Download and install Android Usb Driver on your computer. in case Android usb driver is already installed on your system skip this step.
Step 2. Download the Stock / Custom rom that you want to flash on your Android smartphone and extreact it on your Computer.
Step 3. Launch SP Flash Tool as Administrator
Step 4. Click on Scatter-loading by the right
Step 5. In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word “scatter” in its name )
Step 6. A list with ticked boxes should appear in SP flash tool (preloader, boot, recovery etc)
Step 7. Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it)
Step 8. Connect the switched off phone (with battery inside) to the PC via USB cord without holding any button
Step 9. A progress bar should start running
Step 10. Wait till you get a Success message (green circle with OK), do not interrupt before then
Step 11. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone
Congratulations, you have successfully flash your Android Smartphone.